2004 Arctic Cat ATVs factory service and repair manual, Page 38Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 38

Auxiliary Brake Pedal W NOTE: During the bleeding procedure, watch the reservoir sight glass very closely to make sure there
air bubblesClose the bleeder screw before releasing the brake leverRepeat this procedure until no air bubbles are present4Carehlly
check the entire hydraulic brake system that all hose connections are tight, the bleed screws are tight, the protective caps
are installed7 and no leakage is present A CAUTION This hydraulic brake system is designed to use high-temperature DOT brake
fluid onlyIf brake fluid must be added, care must be taken as brake fluid is very corrosive to painted surfacesINSPECTING
HOSES Carehlly inspect the hydraulic brake hoses for cracks or other damageIf found, the brake hoses must be replacedCHECKINGIREPLACING
PADS The clearance between the brake pads and brake discs is adjusted automatically as the brake pads wearThe only maintenance
that is required is replacement of the brake wads when thev show excessive wearCheck the thickiess of each of ihe brake pads