2004 Arctic Cat ATVs factory service and repair manual, Page 42Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 42

INSTALLING 1Spread the faces of the driven clutch by pushing the inner face toward the engine while turning it counterclockwise;
with the cap screws making sure the different-lengthed cap screws are in their proper locationTighten the cap screws to 1.1
kg-m (8 ft-lb) 2Place the V-belt into position on the driven clutch and over the front shaftW NOTE: Make sure the main engine
ground wire is installed and secured in the proper location 6Secure the front fender to the footrest with the two cap screwsTighten
securely 7Install the right-side footrest (see Section 8) W NOTE: The arrow on the V-belt should point forward 3Pinch the