2004 Arctic Cat ATVs factory service and repair manual, Page 52Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 52

11Remove the cap screws securing the air-intake snorkel to the frame; then loosen the hose clamp at the air-cleaner assembly12Loosen
the cap screws securing the air-cleaner assembly to the rear of the ATV 16Route the carburetor assembly up and away from
the engineI NOTE: It will not be necessary to disconnect the choke cableAlso, use cable ties or tape to secure the carburetor
assembly to keep it from interfering with the removal procedure 17Disconnect the positive cable from the starter motor18Disconnect