2004 Arctic Cat ATVs factory service and repair manual, Page 58Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 58

Removing Left-Side Components ARecoil Starter BStarter Cup CCoverIStator Assembly 3Lay the ATV on its right side; then remove
to the left-side cover; then remove the starter noting the location of the single washerAccount for the gasket c AT THIS
POINT To service the recoil starter, see Servicing Left-Side Components sub-section INOTE: To aid in installing, it is recommended
that the assemblies are kept together and IN ORDER 2Remove the nut and lock washer securing the starter cup to the crankshaft;
then remove the starter cupAccount for the O-ring inside the cup 5Remove the nut securing the magneto rotor to the crankshaft
(D) 6Remove the starter idler gear assembly (E); then account for the snacerthe starter idler gear, and shaft ASub-Transmission
Shaft BDriveshaft CCountershaft DCrankshaft EStarter Idler Gear Assembly FMagneto Rotor Assembly GStarter Clutch Gear Assembly