2004 Arctic Cat ATVs factory service and repair manual, Page 59Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 59

CC873A (2x4) m HDriven Gear (I) IDrive Gear JShift Shaft with Fork KNA LIdler Gear with Two Washers MSub-Transmission Gear
procedure 7Install the magneto rotor puller adapter 9Remove the starter clutch gear assembly (G)from the crankcase 10Remove
the driven gearldriven gear assembly (H) wlwasher (4x4) from the crankcase11Remove the outer drive gear assembly (I) wlwasher
from the driveshaft8Using magneto rotor remover; remove the magneto rotor assembly (F) from the crankshaftAccount for the