2004 Arctic Cat ATVs factory service and repair manual, Page 64Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 64

Separating Crankcase Halves 1Remove the two cap screws securing the starter to the crankcase; then remove the starterAccount
mallet, separate the crankcase halvesAccount for two alignment pins and an O-ring and remove washer from the reverse shifting
camI NOTE: To keep the shaftgear assemblies intact for identification, tap the shafts toward the right-side crankcase half
when separating the halves Center Crankcase Components I NOTE: This procedure cannot be done with the engineltransmission
the frameComplete Removing procedures for Top-Side, Left-Side, and Right-Side must precede this procedureI NOTE: For efficiency,
it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe