2004 Arctic Cat ATVs factory service and repair manual, Page 70Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 70

Measuring Valve GuideNalve Stem Deflection (Wobble Method) 1Mount dial indicator and base on the surface plate; then place
bore; then remove the gauge and measure it with micrometer2Acceptable inside diameter range must be within specifications3If
valve guide is out of tolerance, it must be replaced 3To install valve guide, use valve guide installer and gently drive
valve guide with retaining clip into the bore from the valve spring side until the retaining clip just contacts the cylinder
head Replacing Valve Guide INOTE: If valve guide is worn or damaged, it must be replaced 1If valve guide needs replacing,
insert valve guide remover into the valve seat side of the valve guideUsing hammer, gently drive the valve guide out of the