2004 Arctic Cat ATVs factory service and repair manual, Page 71Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 71

Valve SeatIGuide Servicing Flow Chart 2Insert an intake valve seat pilot shaft into the intake valve guideSlide the intake
carbon from the valves Purpose FINISHED 2Lubricate each valve stem with light oil; then apply small amount of valve lapping
compound to the entire seating face of each valve Grinding Valve Seats cylinder head must be replacedI NOTE: If the valve
seat is beyond servicing, the 3Attach the suction cup of valve lapping tool to the head of the valve 4Rotate the valve until
the valve and seat are evenly polished5Clean all compound residue from the valve and seatMeasuring Rocker Arm (Inside Diameter)
1Using dial calipers, measure the inside diameter of the rocker arm2Acceptable inside diameter range must be within specifications
1Insert an exhaust valve seat pilot shaft into the exhaust valve guideSlide the exhaust valve seat grinding tool onto the