2004 Arctic Cat ATVs factory service and repair manual, Page 78Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 78

4Slowly release the friction plate and lifi the plate with ratchet guide free of the recoil case; then remove the ratchet
Do not remove the spiral spring unless replacement is necessaryIt should be visually insected dace to save timeIf relacement
in is 6Remove the ratchet and account for the spring 9Remove the spiral spring from the case by lifting the spring end up
and outHold the remainder of the spring withAthumbs and alternately release each thumb to allow the spring to gradually release
from the case10Unwind the rope from the reel and remove the ropeCleaning and Inspecting W NOTE: Whenever part is worn excessively,