2004 Arctic Cat ATVs factory service and repair manual, Page 81Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 81

Inspect each driven plate for warpage and burn marksIn turn place each driven plate on the surface plate; then using feeler
WNOTE: Prior to inspecting and measuring components, it is recommended that all components be removed from the primary gear
assembly and be cleaned lnspectingMeasuring Clutch Driven Plate Warpage W NOTE: After removing the clutch hub and clutch
plates, account for the washer beneath the clutch hub Drive plate thickness must not exceed minimum specificationsIf the
fiber plate tabs are damaged, the plate must be replacedInspect the clutch hub for grooves or notchesIf grooves or notches
are present, replace the hubWNOTE: Note the location of the timing mark on the hub for assembly purposes Arctic Cat ATV 2004