2004 Arctic Cat ATVs factory service and repair manual, Page 99Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 99

2Using plastic mallet, lightly tap the case halves together until cap screws can be installed 3From the left side, install
16On the 300, install the oil breather screen noting the direction of the tabs from disassembly Joining Crankcase Halves
1Verify that the alignment pins are in place and that both case halves are clean and grease freeApply Three Bond Sealant
(pln 0636-070) to the mating surfacesPlace the right-side half onto the left-side half 4From the right side, install the