2004 Arctic Cat ATVs factory service and repair manual, Page 111Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 111

I NOTE: When the camshaft assembly is seated, make sure the alignment pin in the camshaft aligns with the smallest hole in
alignment marks parallel to the valve cover mating surface DRecessed side of the sprocket directed toward the cam lobesECamshaft
alignment pin and sprocket alignment hole (smallest) are alignedI NOTE: Note the position of the alignment marks on the end
of the camshaftThey must be parallel with the valve cover mating surfaceIf rotating the camshaft is necessary for alignment,
do not allow the chain and sprocket to rotate and be sure the cam lobes end up in the down position If any of the above factors
are not as stated, go back to step 13 and carefully proceed- 15Place the tab washer onto the sprocket making sure it covers