2004 Arctic Cat ATVs factory service and repair manual, Page 115Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 115

14Tighten the rear hydraulic brake caliper to 2.8 kg-m (20 ft-lb) 7Secure the rear wheels to the hubsTighten to 5.5 kg-m
assembly is installed into the frame or severe damage, injury, or death may result 9Tighten the four upper sub-frame mounting
cap screws in crisscross pattern to 5.5 kg-m (40 ft-lb) 10Tighten the two lower sub-frame mounting cap screws to 5.5 kg-m
(40 ft-lb)11Secure the skid plate to the rear end assemblyTighten securelyCHUBfD 17Secure the right-hand side panel 12Secure
the two oil cooler hoses to the engine 18Secure the remaining connectors to the main wiring harness13Secure the brake hose