2004 Arctic Cat ATVs factory service and repair manual, Page 117Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 117

28Connect the positive cable to the starter motor; then connect the ground (negative) cable to the crankcase29Fill the engine
then the negativeLcable.Connect the high tension lead to the spark plug32Install the seat33Adjust the auxiliary brake to
within specifications27Secure the muffler and exhaust pipeTighten securely34Remove the tie-down straps; then remove the ATV
from the support stand35Turn the gas tank valve to the ON position If the engine had major overhaul or if any major part