2004 Arctic Cat ATVs factory service and repair manual, Page 120Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 120

16Remove the four cap screws securing the rear output joint to the transmission and push the shaft away from the transmission
air intake hose to the carburetor; then remove the air cleaner housing I NOTE: Use cable ties or tape to secure the carburetor
assembly above the handlebars to keep it from interfering with the removal procedure 19Remove the clamps securing the two
oil cooler hoses to the engine; then disconnect the hoses I NOTE: After disconnecting the oil cooler hoses, plug them to
prevent leakage from the cooler BLoosen the clamps securing the carburetor boot and the air inlet boot 20Disconnect the high