2004 Arctic Cat ATVs factory service and repair manual, Page 124Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 124

8 Remove the cam chain tensioner by lifting it from the chain cavity; then remove the two lower nuts securing the cylinder
nearest the cam sprocket are longer than the two cap screws on the left (spark plug) side 7Note the timing marks for installing
purposes; then drop the sprocket off the camshaftWhile holding the chain, slide the sprocket and camshaft out of the cylinder
headAccount for an alignment pin 10Remove the cylinder head from the cylinder, remove the gasket, and account for two alignment
pins WNOTE: Loop the chain over the cylinder and secure it with wire to keep it from falling into the crankcase3-82 Page: