2004 Arctic Cat ATVs factory service and repair manual, Page 142Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 142

4After installing the guide, use the standard valve guide reamer to remove all burrs and tight areas that may remain in each
be replaced Lap Valve compound erfectiy match valve and seat area check valve head for damage purpose FINISHED 1Remove all
carbon from the valves2Lubricate each valve stem with light oil; then apply small amount of valve lapping compound to the
entire seating face of each valve3Attach the suction cup of valve lapping tool to the head of the valve Grinding Valve Seats
cylinder head must be replacedI NOTE: If the valve seat is beyond servicing, the 1Insert an exhaust valve seat pilot shaft
into an exhaust valve guideSlide an exhaust valve seat grinding tool onto the pilot shaft; then using light pressure on driver
handle and deep socket, grind the exhaust valve seat until within specifications3-100 Page: 142 Arctic Cat ATV 2004 -All