2004 Arctic Cat ATVs factory service and repair manual, Page 153Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 153

2In turn place each driven plate on the surface plate; then using feeler gauge, measure warpage in several locations Inspecting
in turn measure the thickness of each drive plate in several locations 3If the inner race is locked in place or rotates both
directions, the drive assembly must be replacedMeasuring Clutch Spring Length 1Using calipers, measure the overall free length
of the clutch spring 2Drive plate thickness must not exceed minimum specifications3If the fiber plate tabs are damaged, the
plate must be replaced 4Inspect the clutch sleeve hub for grooves or notchesIf grooves or notches are present, replace the
hubInspecting Starter Clutch Shoe 1Inspect the starter clutch shoe for uneven wear, chips, cracks, or bums2Overall length