2004 Arctic Cat ATVs factory service and repair manual, Page 167Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 167

1Install the 4th drive washer onto the countershaft 2Install the 4th drive gear making sure the bushing is in position; then
assembled for installation 4Install the 5th drive washer and 5th drive gear onto the countershaft Assembling Crankcase Half
I NOTE: For ease of assembly, install components on the left-side crankcase half IIf the output shaft and gear were removed,
make sure that the proper shim is installed To install the output shaft and gear, place the shaft into position with proper