2004 Arctic Cat ATVs factory service and repair manual, Page 171Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 171

7In crisscrosscase-to-case pattern, tighten the mm cap screws (from step 4) until the halves are correctly joined; then tighten
steps 5-6) to 0.9-1.3 kg-m (6.5-9.5 ft-lb)INOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs
3Place the oil pump into position in the crankcase and secure with the three Phillips-head screws coated with blue Loctite
#243Tighten to kg-m (7 ft-lb) Installing Right-Side Components AOil StrainerIOil Pump BGear Shift Shaft 1Place the oil strainer
with new O-ring into position beneath the crankcase and tighten securely with the Phillips-head cap screws 4Place the pin