2004 Arctic Cat ATVs factory service and repair manual, Page 189Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 189

2Remove the negative cable from the battery; then remove the positive cableRemove the battery hold-down strap and the battery
blockThis will aid in installing correctly 4Carefully guide the battery cables and fuse block wiring down through the access
hole into the engine compartment for future removing 5.Drain the oil enginetransmission beneath 11Disconnect the crankcase
vent hose from the air cleaner housingRemove the clamps securing the air intake hose to the carburetor; then remove the air
cleaner housing View from Beneath 6, Remove the hardware securing the right-side and left-side panels; then remove the panels
12Remove the hardware securing the cooling duct assembly to the frame 7Turn the gas tank valve to the OFF position; then