2004 Arctic Cat ATVs factory service and repair manual, Page 190Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 190

14Remove the hardware securing both footrests to the frame and front fender 18Remove the tom-head screws securing the exhaust
fender to remove the engine; however, removing the screws securing the inner front fenders will allow the fender to be moved
to accommodate the removing of the exhaust pipe and engine 20Rcmo the hardware sccurina the exhaust pipe to the muffler,
frame, and engine; then remove the exhaust pipe 2 1Remove the two oil hoses from the engineRoute the hoses out of the wayI
NOTE: There will be substantial amount of oil draining from the oil hoses when removingPlace drain pan beneath the hoses