2004 Arctic Cat ATVs factory service and repair manual, Page 192Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 192

29Remove the two cap screws securing the front upper engine mount to the frame 35Remove the caps screws securing the two
securing the engine ground wire to the engineRemove the three engine mounting through-boltsAccount for washer on the upper
bolt and spacer on the lower front bolt 37Remove the tom-head screws securing the left-side clutch plenum to the engine;
then remove the plenum and account for gasket 38Remove the engine from the right side by moving the engine forward while
raising the engine in the rear and rotating the engine counterclockwiseThe engine will come out the right side of the frame