2004 Arctic Cat ATVs factory service and repair manual, Page 198Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 198

3Lay the engineltransmission on its right sideRemove the 14 left-side cover-to-crankcase mounting cap screws noting the location
for the two alignment pins and the position of the shifter bracket for installing purposes IVIUl 100 I NOTE: Inspect the
inside of the left-side cover for any shaft washers that may have come off with the coverMake sure thev are returned to their
respective shafts and that the starter idler gear spacer is on the shaft or in the cover Care must be taken that the remover
is fully threaded onto the rotorlflywheel or damage may occur 7, using Magneto R R(pn 0444-075)break the rotorlflywheel assembly