2004 Arctic Cat ATVs factory service and repair manual, Page 247Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 247

22Place the footrests in position on the frame; then secure with existing hardwareTighten the 10 mm cap screws to 5.5 kg-m
A CAUTION It is critical that all wiring be connected correctly to ensure all components function properly 32Place the fuse
block into position and secure with existing screwsI NOTE: If the mounting screw holes have elongated, it will be necessary
to install larger diameter screws Install the rear rack and rear fenders with existing hardwareTighten securelySecure the
wiring harness to the frame with cable tiesInstall the gas tank; then connect the vent hose 33Place the battery into position
in the battery compartment; then install the battery cables and vent hoseSecure with the hold-down strap Battery acid is
harmful if it contacts eyes, skin, or clothingCare must be taken whenever handling battery 34Connect the spark plug wire