2004 Arctic Cat ATVs factory service and repair manual, Page 248Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 248

35Add proper amount of engineltransmission oil 36Install the seat 2Remove the negative cable from the battery; then remove
removing5.Drain the oil engineltransmissionfrom beneath the Removing Engine Transmission Many service procedures can be performed
without removing the engineltransmission from the frameClosely observe the note introducing each sub-section for this important
informationC AT THIS POINT If the technician's objective is to servicelreplace left-side cover oil seals (3), front output
joint oil seal (I), rear output joint oil seal (I), andlor the oil strainer (from beneath the engine1 transmission), the
engineltransmission does not have to be removed from the frame View from Beneath 6Remove the hardware securing the right-side
and left-side panels; then remove the panels 7Turn the gas tank valve to the OFF position; then remove the fuel hose and