2004 Arctic Cat ATVs factory service and repair manual, Page 280Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 280

INSPECTING OIL PUMP Servicing Right-Side Components I NOTE: Whenever part is worn excessively, cracked, damaged in any way,
STARTER CLUTCH HOUSING 1Inspect the starter clutch housing for bums, marks, scuffs, cracks, scratches, or uneven wear 1Secure
Driven Pulley Compressor (pln 0444-121) in suitable holding fixture such as bench vise; then remove the wing nut, holding
handle, flat washer, and pilot bushing leaving the large spacer on the compressor tool base 2If the housing is damaged in
any way, the housing must be replacedINSPECTING PRIMARY ONE-WAY DRIVE 1Insert the drive into the clutch housing2Rotate the
inner race by hand and verify the inner race rotates only one direction3If the inner race is locked in place or rotates both