2004 Arctic Cat ATVs factory service and repair manual, Page 296Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 296

6Install the magneto cover and secure with existing hardwareTighten to 1.1 kg-m (8 ft-lb) 7Place the speedometer gear housing
the shift arm on the shift arm shaft making sure the scribed marks (from removing) are alignedTighten securely11Place the
starter cup into position on the crankshaft making sure newlubricated O-ring is inside the cup flange nut to 3.5 kg-m the
(25 ft-lb) 9Install the crossover tube on the water pump and cylinder head making sure the O-ring is properly positioned