2004 Arctic Cat ATVs factory service and repair manual, Page 300Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 300

14With the cam lobes directed down (toward the piston), maneuver the camshaftlsprocket assembly through the chain and towards
are not as stated, go back to step 11 and carefully proceed I NOTE: Note the position of the alignment marks 16Place the
tab-washer onto the sprocket making sure it covers the pin in the alignment hole on the end of the camshaftThey must be parallel
with the valve cover mating surfaceIf rotating the camshaft is necessary for alignment, do not allow the chain and sprocket
to rotate and be sure the cam lobes end up in the down position 15Seat the cam sprocket onto the camshaft making sure the