2004 Arctic Cat ATVs factory service and repair manual, Page 301Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 301

17Install the first cap screw (coated with red Loctite #271) securing the sprocket and tab-washer to the cam shaftTighten
cylinder I NOTE: The adjuster shaft will be drawn into the tensioner as the adjuster screw is rotated clockwiseThe adjuster
shaft tension will be released in step 22 21Place the chain tensioner adjuster assembly and gasket into position on the cylinder
and secure with the two Allen-head cap screws 19Install the cylinder head plug in the cylinder head with the open end facing