2004 Arctic Cat ATVs factory service and repair manual, Page 302Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 302

22Using flat-blade screwdriver, rotate the adjuster screw inside the tensioner counterclockwise until all tension is released;
to the camshaft can be installed; then install the cap screw (coated with red Loctite #271) and tighten to 1.5 kg-m (11 ft-lb)Bend
the tab to secure the cap screwRotate the crankshaft until the first cap screw securing the sprocket to the camshaft can
be addressed; then tighten to 1.5 kg-m (11 ft-lb)Bend the tab to secure the cap screwLoosen the four adjuster screw jam nuts;
then loosen the four adjuster screws on the rocker arms in the valve cover 29In crisscross pattern starting from the center