2004 Arctic Cat ATVs factory service and repair manual, Page 305Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 305

20Install the exhaust pipe shroud and secure with the existing tom-head screwsTighten securely 25Install the air cleaner
with existing hardwareTighten the 10 mm cap screws to 5.5 kg-m (40 ft-lb) and the mm cap screws to 2.8 kg-m (20 ft-lb)Secure
the fender extensions to the footrest using existing hardwareInstall the cooling duct shroud; then secure the cooling duct
assembly to the frame 26Install the rear racklfender assembly with existing hardwareTighten securely 27Secure the wiring