2004 Arctic Cat ATVs factory service and repair manual, Page 306Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 306

Table of Contents (500 Manual Transmission) Place the right-side and left-side panels into position; then install the existing
compartment; then install the battery cables and vent hoseSecure with the hold-down strap AT THIS POINT If the technician's
objective is to servicelreplace left-side cover oil seals (3), front output joint oil seal (I), rear output joint oil seal
(I), andlor the oil strainer (from beneath the engine1 transmission), the engineltransmission does not have to be removed
from the frame Battery acid is harmful if it contacts eyes, skin, or clothingCare must be taken whenever handling battery
34Add proper amounts of engineltransmission oil and coolant35Install the seat Secure the ATV on support stand to elevate
the wheels Make sure the ATV is solidly supported on the support stand to avoid injury 1Remove the seat2Remove the negative
cable from the battery; then remove the positive cableRemove the battery vent hose; then remove the battery Battery acid