2004 Arctic Cat ATVs factory service and repair manual, Page 307Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 307

3Near the battery tray, remove the two screws securing the fuse block; then carefully remove all the wiring from the block
to the shift lever armRemove the shift rod Engi Iran Drain Plug View from Beneath 6Remove the hardware securing the right-side
and left-side panels; then remove the panels 7Turn the gas tank valve to the OFF position; then remove the fuel hose and
vent hose8Remove the gas tank9Remove the rear fenders and the rear rack (see Section 8) 10Remove the hardware securing both
footrests to the frame and front fender 14Detach the speedometer cable by loosening the knurled nut and routing the cable
away from the engineltransmission 11Remove the two cap screws securing the exhaust pipe to the engine; then loosen the exhaust