2004 Arctic Cat ATVs factory service and repair manual, Page 310Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 310

Top-Side Components I NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to
in each sub-section I NOTE: The engineltransmission does not have to removed from the frame for this procedure Removing Top-Side
Components AValve Cover BCylinder Head INOTE: Remove the spark plug and timing inspection plug; then using the recoil starter,
rotate the crankshaft top-dead-center of the compression stroke 1Remove the two tappet covers INOTE: Note that the opening
of the head plug can be directed to the 12 o'clock position or to the o'clock position I NOTE: Keep the mounting hardware
with the covers for assembly purposes or thread them back into the head to keep them separated 3Loosen the cap screw on the