2004 Arctic Cat ATVs factory service and repair manual, Page 340Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 340

Cleaning and Inspecting I NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessarv
the inner hook of the spiral spring with the notch in the reel 6Install the ratchet onto its spring making sure the end is
wrowerlv installed on the reel 1If removed, insert the spiral spring into the case with the outer end of the spring around
the mounting lug in the case; then wind it in counterclockwise direction until the comnlete spring is installedI NOTE: The
spiral spring must seat evenly in the recoil case 7Install the shaft, spring, and the spring cover 2Insert the rope through
the hole in the reel and tie knot in the end; then wrap the rope counterclockwise around the reel leaving approximately 50