2004 Arctic Cat ATVs factory service and repair manual, Page 342Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 342

2In turn place each driven plate on the surface plate; then using feeler gauge, measure warpage in several locations 3Shift
components, it is recommended that all components be removed from the primary gear assembly and be cleanedI NOTE: When removing
components from the primary gear assembly, account for the bushing that fits into the primary gear 2Drive plate thickness
must be within minimum specifications3If the fiber plate tabs are damaged, the plate must be replaced 4Inspect the clutch
sleeve hub for grooves or notchesIf grooves or notches are present, replace the hubInspecting Starter Clutch Shoe 1Inspect
the starter clutch shoe for uneven wear, chips, cracks, or bumsInspectingIMeasuring Clutch Driven Plate Warpage 1Inspect