2004 Arctic Cat ATVs factory service and repair manual, Page 344Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 344

INSPECTING OIL PUMP 1Inspect the pump for damage 2It is inadvisable to remove the screw securing the pump halvesIf the oil
procedureAlso, always start with the original shims on the rear shaft 1Place the left-side crankcase cover onto the left-side
crankcase half to prevent mnout of the secondary transmission output shaft 2Install the secondary driven output shaft assembly
onto the crankcaseThe clutch hub and the pressure plate must be seated in the proper positionIf any of the incorrect positions
are used, the hub and plate will have clearance between them and they will not operate properlyI NOTE: The primary clutch
assembly is now completely assembled for installation 3Mount the indicator tip of the dial indicator on the secondary driven