2004 Arctic Cat ATVs factory service and repair manual, Page 364Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 364

I NOTE: Care should be taken that the alignment pins are installed in the right-side cover LLULU 23Using the oil filter wrench,
of the long cap screw with rubber washer 24Install the coolant hose on the water pump and secure with the clamp 21Tighten
the cap screws in crisscross pattern to 0.9-1.3 kg-m (6.5-9.5 ft-lb)22Place the water pump cover onto the right-side cover
making sure the new O-ring is properly positionedTighten securely with the three cap screws Installing Left-Side Components