2004 Arctic Cat ATVs factory service and repair manual, Page 374Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 374

APiston still at top-dead-center BCamshaft lobes directed down (toward the piston)CCamshaft alignment marks parallel to the
tab-washer onto the sprocket making sure it covers the pin in the alignment hole 17Place the C-ring into position in its
groove in the cylinder Care must be taken that the tab-washer is installed correctly to cover the alignment hole on the sprocketIf
the alignment pin falls out, severe engine damage will result 18Install the cylinder head plug in the cylinder head with