2004 Arctic Cat ATVs factory service and repair manual, Page 389Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 389

6Inspect the vacuum pistonldiaphragm for cracks, imperfections in the casting, or cracks and tears in the rubber7Inspect
be extremely lean at idle and part-throttle operation 1Start the engine and warm it up to operating temperature2Turn the
idle adjustment screw clockwise or counterclockwise until the engine idles at recommended RPM 11Inspect the plunger assemblylstarter
valve and seat for wear or damage12Inspect the carburetor mounting flange for damage and tightness Throttle Cable Free-Play
1Check throttle cable free-play at the lever; free-play should be 3-6 mm (118114 in2To adjust, slide the rubber boot away
from the adjuster located near the throttle leverLoosen the jam nut and rotate the adjuster in the appropriate direction
until proper free-play is attainedTighten the jam nut against the adjuster; then slide the rubber boot over the adjusterJam