2004 Arctic Cat ATVs factory service and repair manual, Page 391Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 391

3Inspect gas tank valve, tank cap, and tank for leaks, holes, and damaged threads4Inspect the gas gauge for proper operationINSTALLING
be sure the indicator is pointed directly at the position desired Drain the gas tank prior to this procedure 5Turn the gas
tank valve to the ON position and inspect for leakage6Install the seat 1Remove the gas hose from the valve by releasing the
spring clamp2Remove the two nuts securing the valve; then remove the valveAccount for the gasket 3Inspect the gasket and
valveltank mating surfaces for damage or deterioration Gas Tank Valve The ATV has valve incorporated into the gas tankThere
are three positions: ON, RES, and OFF 4Inspect for and remove any obstructions in the valveINSTALLING 1Place the valve and
gasket into position on the tank and secure with the nutsTighten to 0.1 kg-m (1 ft-lb)2Install the gas hose onto the valve
with the spring clamp GasVent Hoses Replace the gas hose every two yearsDamage from aging may not always be visibleDo not