2004 Arctic Cat ATVs factory service and repair manual, Page 395Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 395

W NOTE: If the oil pressure is lower than specified, check for an oil leak, damaged oil seal, or defective oil pump REMOVING
and washers I Oil Cooler 2Grommet 3, Cap Screw 4Collar 5Hoseclamp 6Hose (Input) 7Hose (Output) 8Fitting 9Cap Screw 100-Ring
11Fitting 2501300 3Remove the oil cooler from the frameINSTALLING IOil Cooler Assy 2Shroud 3Fan 4Thumb Screw 5, Screen 6Machine
Screw 7Grommet 8Drain Plug 90-Ring 10Bushing 11Fitting 12Fitting 13Cap Screw 14Washer 15Collar 16Clamp 17Cap Screw 180-Ring
19Nut wmasher 20Hose 1Place the collar into position in the frame 2Secure the cooler to the frame with the cap screws7 washers,