2004 Arctic Cat ATVs factory service and repair manual, Page 400Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 400

Servicing Water Pump (500 - Automatic Transmission) W NOTE: When servicing the water pump, it will be necessary to install
the coolant 4From inside the lefi-front vvheel-well, remove the two tom-head cap screws securing the fender to the frame
2Drain the oil from the engineltransmission3Remove the four tom-head cap screws securing the front and rear fenders to the
footrest; then remove the four cap screws securing the footrest to the frameRemove the footrest 5Compress the tabs on the
coolant hose clamps and slide the clamps away from the hose ends approximately 51 mm (2 in; then remove both hoses from the