2004 Arctic Cat ATVs factory service and repair manual, Page 413Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 413

RESISTANCE Always disconnect the battery when performing resistance tests to avoid damaging the1 multimeterI NOTE: For these
If the meter does not show as specified, replace ignition coil Spark Plug Cap 1Connect the red tester lead to one end of
the cap; then connect the black tester lead to the other end of the cap 2The meter reading must be within specificationSecondary
Winding 1Connect the red tester lead to the high tension lead (plug cap removed); then connect the black tester lead to ground2The