2004 Arctic Cat ATVs factory service and repair manual, Page 447Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 447

4Loosen the front cap screw; then tighten the cap screw on the driveshaft side Front Differential View from Beneath 3Remove
remove the rear gear case on 400 FISl500 models, see Rear Gear Case (400 FISl500 Models) in this section 5Pump up the hand
brake; then engage the brake lever lock 6Remove the cotter pin securing the hex nut; then remove the hex nutand washerRelease
the brake lever lock REMOVING DIFFERENTIAL 1Secure the ATV on support stand to elevate the wheels Make sure the ATV is solidly
supported on the support stand to avoid injury 2Remove the drain plug and drain the gear lubricant into drain pan; then reinstall
the plug INOTE: It is not necessary to remove the brake hoses from the calipers for this procedure 7Remove the brake calipersAccount