2004 Arctic Cat ATVs factory service and repair manual, Page 471Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 471

4Inspect the sealing area of the hub for pits5Inspect the hub splines for signs of wear6Inspect the hub for cracks 5Place
(20 ft-lb) INSTALLING Secure the brake disc to the hub with the four cap screws coated with blue Loctite #243Tighten to 2.1
kg-m (15 ft-lb)Apply grease to hub sealing area and on the splines 7Tighten the hub nut (from step 5) to 10.4 kg-m (75 ft-lb);
then install and spread new cotter pin making sure each side of the pin is flush to the hub nut Install the hub assembly