2004 Arctic Cat ATVs factory service and repair manual, Page 485Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 485

10Secure the shock absorber to the frame with cap screw and new lock nutTighten to 4.8 kg-m (35 ft-lb)11Secure the shock
INFLATION PRESSURE Front and rear tire inflation pressure should be 0.35 .O psi) Use only Arctic Cat approved tires when
replacing tiresFailure to do so could result in unstable ATV operation REMOVING 1Secure the on support stand to elevate the
wheels The ATV is equipped with low-pressure tubeless tires of the size and type listed belowDo not under any circumstances
substitute tires of different type or size Make sure the ATV is solidly supported on the support stand to avoid injuryDo
not mix tire tread patternsUse the same pattern type on front and rearFailure to heed warning could cause poor handling qualities