2004 Arctic Cat ATVs factory service and repair manual, Page 486Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 486

CLEANING AND INSPECTING I NOTE: Whenever part is worn excessively, cracked, or damaged any way, replacement is necessary
professionallyI NOTE: Make sure each wheel is installed on its NOTE: Be sure all tires are the specified size and have identical
tread pattern proper hub as noted in removing (the "rotation arrow" must indicate forward direction of rotation) 3Check the
front wheel toe-in and toe-out and adjust as necessary (see Section 8) 4Test drive the ATV on dry, level surface and note
any pulling to the left or right during acceleration, deceleration, and brakingI NOTE: If pulling is noted, measure the circumference
of the front and rear tires on the pulling sideCompare the measurements with the tires on the opposite sideIf pulling is
noted during braking only, check and adjust the brakes as necessary and recheck operation (see Section 2) Page: 486 Arctic