2004 Arctic Cat ATVs factory service and repair manual, Page 491Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 491

REMOVING 1Remove the seat (see Seat in this section) 2Turn the gas tank valve to the OFF position; then remove the left-side
pin and slotted nut securing each tie rod end to the steering post armRemove the tie rod ends from the arm 9On the 4001500
models, remove the cap screws securing the instrument pod 6Remove the cotter pin and slotted nut securing the side tie rod
ends to the knucklesRemove the tie rod ends from the knuckles; then remove the tie rods 7Remove the cap screws securing the